Jeep Crawler on 39" Red's

I have a Jeep Crawler that started life as a 1992 Jeep Cherokee. Built right, I included photos of welds so you can see this is not some hack job. Jeep goes very well.

4.0, AW4 (auto), NP231 w/ slip yoke eliminator
Dana 60 front 79 Ford with 5.38, 35 spline outers, 4WD flanges, welded, solid diff cover
Rear 14 bolt disc brakes, 5.38, trussed w/ link mounts, welded, solid diff cover
long arm radius arm style front with Ruff Stuff heims
rear 4 link with all Ruff Stuff heims
PSC high volume pump with AGR ram and steering box (Hydro assist)
39" Krawlers with Kore DIY beadlocks on black rock crawler wheels (maybe 5 rides on tires)
back halfed with all tube rear (would be very easy to add a rear seat)
skid plate built of ¼" plate and cross member for front lowers is built very similar to Clayton offroad cross member
Race seats with 4 point harnesses, I have the other strap to make 5 points (never installed the 5th strap)
uni-body has been plated with 1/4" plate up and down both sides of remaining uni-body
interior cage tied into the plating and also tied to the rear tube work
front bumper with hidden winch mount XRC 8000 with rope
113" wheelbase, does very well in the woods

Jeep is located in Waleska, GA just north of Canton, GA

Would like to trade for a streetable TJ plus some boot. Nothing bigger than a 35" tire unless it is super road worthy. Prefer a auto at my age....

$9000 obo if I am priced to high, please feel free to make an offer

I will entertain all cash offers, please be reasonable. Feel free to contact me @ 770-Fivehundred-86fiftyeight, I prefer text during business hours.

Crawler Hauler is also for sale, 2004 Tahoe Pak Rat $6500 has toilet, shower, fridge, AC and Heat, Queen size bed, tons of storage for size, also has a large screen porch that assembles on trailer deck , brand new tires less than 1000 miles, also includes generator









[img width=1000 height=750]https://2img.net/h/i900.photobucket.com/albums/ac203/timmayjeep/Picture2597.jpg[/img]

Link to a video....

Jb takes on wall 2011





\

JB

Nice vid. Looks like I almost spilled my beer running for cover when you shot up the "wall". Hahaha.

Sad day man... GLWS. Someones getting a nice rig.

Jebus...just trading one baby for another

Does it come with the sweet cd that you play round the clock?

Yep, the CD that is stuck in the CD player comes with......

JB

SOLD

Whoops! Guess you should ask for more next time.

Gonna get a mustang now?

**Digger** wrote:SOLD

Did you sell just the truck? If you still have the pak rat and the loudest generator on earth I am interested in them.

SOLD it all.....

Glenn: I did buy the Mustang, I will post some pictures soon.

JB

Damn... well lets see some pics of the car that will claim your drivers license. Fuck sad day. Disregard my incoherent rambling as I'm drunk...but hell.. another brother down.

Here are a couple pics of the new car..... Currently makes 578HP and once I get another pulley it will be at around 620HP, it is fun to drive and is fast as shit!







Here is the build list....

Motor (all 6000+/- miles)
• Std Bore/stroke 03 Cobra Shortblock -- Refreshed by Walker Custom Engines
o ARP Head and rod studs
o Windage tray
o Clevite Bearings
o Total Seal rings
o Moroso 7qt oil pan
• MMR Stage 3 race ported heads w/comp valve springs, Ferrea Valves (oversized 2mm), Bronze valve guides
• Modular Powerhouse Kenne Bell cams
• Team breed aluminum valve covers
• MMR racing/street oil pump w/ cryo gearset
• Kenne Bell 2.2 Supercharger
• Oversized heat exchanger and reservoir
• 8-rib pulley setup
• New alternator, a/c compressor
• Battery relocation to trunk
• Moroso Aluminum radiator reservoir
Fuel System
• 03 Cobra tank and pumps
• Kenne bell boost-a-pump
• 60lb injectors
• Fuel cutoff switch
Suspension
• H&R Lowering springs
• Steeda upper and lower rear control arms
Wheels/Tires
• Front: 17x8 Factory Bullitt wheels w Nitto Envo tires (like new)
• Rear: 17x10.5 Bullitt wheels w Toyo Proxes TQ Drag Radials (4/32nds, half worn)
Exhaust
• Bassani stainless steel catback exhaust
• BBK Long tube headers
• BBK x pipe
Transmission/Clutch
• Stock Tremec TR-3650
• Custom clutch by Clutch Exchange Service, Powder springs
• Steeda Short shifter
• Ford Racing Aluminum driveshaft
• Driveshaft safety loop
Exterior
• Steeda 2in Cowl hood
• Mach 1 chin spoiler
• Stock otherwise
Interior
• Billet interior knob kit (window switches, ac knobs, radio knobs, e-brake handle)
• Auto dimming rearview mirror
• Autometer A piller pod -- Boost and fuel pressure gauges
• Stock otherwise
Rear end
• Moser 31 spline axles
• Eaton trac loc
• TA girdle
• 3.73 gears

Sad day Indeed.


Jb I'll believe 600+hp when I see a dyno sheet. Lots of bells and whistles....I wanna see prooooooooof!

Maybe your big hairy ass gyro is enough tho...

should get you to the grocerie store fast i guess..... yay for cars

I'll get you HOMOS a dyno sheet. I have one that came with the car. And for the record, I will build another Jeep, I am looking for a TJ now. Want to have something more like you Scott that has some road manners. I would like a TJ on tons with maybe some TOYO's and plop it down the road. We shall see.... May just start out with chromos in the 30 and put an 8.8 in it, and maybe 36" or 37". Should be able to drive back and forth to work and be able to wheel when I want to.

JB

**Digger** wrote:I'll get you HOMOS a dyno sheet. I have one that came with the car. And for the record, I will build another Jeep, I am looking for a TJ now. Want to have something more like you Scott that has some road manners. I would like a TJ on tons with maybe some TOYO's and plop it down the road. We shall see.... May just start out with chromos in the 30 and put an 8.8 in it, and maybe 36" or 37". Should be able to drive back and forth to work and be able to wheel when I want to.

JB

YAAAAAAAY

**Digger** wrote:Here are a couple pics of the new car..... Currently makes 578HP and once I get another pulley it will be at around 620HP, it is fun to drive and is fast as shit!

Sweet! Where do I get a 44 hp pulley? I'll take two!!

Hell, I'll even take a 42 hp pulley!

Mehh.. I put a 44 HP pulley on my lawn mower and barely saw 30 HP at the blade.